MACHINE CONTROL SERVICES
THESE FANUC UPGRADES ARE FOR:
FANUC 0, Fanuc 6, 9, 10,11, 12, Fanuc 15,
16, 18 and 21 i CONTROLS
| Cool New Data Shuttle!
File transfer and Storage device 2 Megs of storage Up to 62 Files Make separate folders too. Works with any Control* |
 |
Speeds up file transfers!
File transfer and Storage device Comes with Software Disk Cables, Manual and... you can even Drip Feed with it. |
Fanuc 6, 9, 11 and Fanuc 12 Control Program Memory
Fanuc High Speed Solid State CNC Program Memory Upgrade
Board
Level II MME with Quick-load and Parameter Sentry System
SKU-2120 MME 320 meters (128K) for Fanuc 6/11/12
SKU-2140 MME 1280 meters (512K) for Fanuc 6/11/12
SKU-2141 MME 1280 meters (512K) for Fanuc 9 (HSL base)
SKU-2150 MME 2560 meters (1 Meg) for Fanuc 11/12
SKU-2170 MME 5120 meters (2 Meg) for Fanuc 11/12
Note: Fanuc 9 Controls can have a total of 4 MME 1280 Meter boards installed for a total of 2 megabytes of Memory
FANUC 0-A/B/C Memory Upgrades
Memory
upgrade kits with Chips, Software and Documentation Fanuc OPN: SKU-3310 120 meters (48K) for Fanuc 0 Model A
PN: SKU-3340 320 meters (128K) for Fanuc 0 Model B
PN: SKU-3370 320 meters (128K) for Fanuc 0 Model C
Note: Standard Fanuc Controls came with only 14k of memory
FANUC 10-A, AD and Fanuc 10-B Memory Upgrades
Memory upgrade kits with software and documentation
SKU-3130 80 meters (32K) for Fanuc 10A
SKU-3260 480 meters (192K) for Fanuc 10AD
SKU-3270 640 meters (256K) for Fanuc 10B (or 10 Level II)
Fanuc 15 A and Fanuc 15 B Memory Upgrades
Note upgrades for 15A SKU-2340 & SKU-2351 require trade-in of old BASE-0 board
SKU-2340 1280 meters (512K) for Fanuc 15A (BASE-0 Upgrade)
SKU-2345 1 Meg (2560 meters) Fanuc 15A Memory Upgrade - Additional
NewSKU-2350 2 Meg (5120 meters) Fanuc 15A Memory Upgrade - Additional
NewSKU-2351 2.5 Meg (6400 meters) Fanuc 15A Memory Upgrade
NewSKU-2355 1280 meter (512k) Fanuc 15B Memory Upgrade SIMM's
SKU-2360 1 Meg (2560 meters) Fanuc 15B Memory Upgrade SIMM's
SKU-2370 2 Meg (5120 meters) Fanuc 15B Memory Upgrade SIMM's
SIMM'S Memory
FANUC 16, Fanuc 18, Fanuc 20 & 21 Series "i" Model A Memory Upgrades
SKU-2600 1280 meters (512K) Fanuc i Memory (15,16,18,20,21)
NewSKU-2610 2560 meters (1 Meg) Fanuc i Memory (15,16,18)
NewSKU-2620 5120 meters (2 Meg) Fanuc i Memory Module (15,16)
New
Replacement SIMM Kit - note PCMCIA card (for models B & C) are extra
SKU-2420 320 meters (128K) for Fanuc 16A and 18A
SKU-2430 640 meters (256K) for Fanuc 16A and 18A
SKU-2440 1280 meters (512K) for Fanuc 16A and 18A
SKU-2421 320 meters (128K) for Fanuc 16B/C and 18B/C
SKU-2431 640 meters (256K) for Fanuc 16B/C and 18B/C
SKU-2441 1280 meters (512K) for Fanuc 16B/C and 18B/C
SKU-2470 5120 meters (2 Meg) for Fanuc 16B/C and 18B/C (Note SKU-2471)
SKU-2471 5120 meters (2 Meg) for Fanuc 16B - Special for A16B-3200-0010 M/B
NewPCMCIA Cards needed with above are listed below
===============================================
SKU-2490 1 Meg SRAM Fanuc Compatible PCMCIA Card
SKU-2500 2 Meg SRAM Fanuc Compatible PCMCIA Card
SKU-2510 4 Meg SRAM Fanuc Compatible PCMCIA Card
Call 903-577-0569
Fanuc High Speed Solid State CNC Program Memory Upgrade
Boards
Until recently, increasing part program storage in your Fanuc CNC's meant great cost and bother. As most CNC's only have a minimum of part program storage, you may have been forced to split programs or continuously clear Memory. Not a very good solution, and extremely time consuming.Now there is an alternative.
MCS
can offer you a cost-effective, trouble-free answer to your FANUC memory problems. We have Fanuc Memory Kits. The Kits consist of Tested components, Applicable tools, a Manual and Software. The Fanuc Series 15 requires the trade-in of your old BASE-0 board for a new upgraded one.(Note: always back-up your NC and PC parameters.
KEY ADVANTAGES OF MEMEX MEMORY UPGRADE KITS
Cost savings of up to 75% over GE FANUC FANUC parameter Back-up software
Reduced program reloads and guaranteed data loading
- Immediate program viewing and editing after loading
Block Restart and Multi-Block Retrace functions can be used (If available)
Three-Year limited warranty The following are the MEMEX Memory products we have.
Click on the Blue Underlined Text.Fanuc Bubble Memory upgrade. (For Fanuc 6,9,11&12)
Tape reader emulator for Fanuc, GE, Remex, Decitek, SanyoYASNAK
Yasnak I80 Yasnak LX1 and Yasnak MX1 Memory Upgrades
--- Call 903-577-0569Memex Memory Engine (MME) upgrade memory capacity and speed for your Fanuc O, Fanuc 6, Fanuc 9, Fanuc 10, Fanuc 11, & Fanuc 12 Series Machine Tool Controls. Available Sizes: MME 320 metres (128K) for Fanuc 6/11/12 - SKU-2120 MME 1280 metres (512K) for Fanuc 6/11/12 - SKU-2140 MME 1280 metres (512K) for Fanuc 9(HSL Base) - SKU-2131 MME 5120 metres (2M) for Fanuc 11/12 - SKU-2170
Fanuc Parts, For Exchange and Repair.
Boards, Drives, Monitors, Power Supplys, etc
Save up to 50% over OEM prices on Fanuc Parts.Machine Control Services
Fanuc Parts Service | Fanuc Controls | Fanuc Drives | Fugi Drives | Fanuc Motors | Fanuc Spindle Drives | Fanuc Home Page | Fanuc repairs | Fanuc Bubble Memory | Mazak Memory | Mitsubishi Memory | Cnc Machines | Fanuc Software| Fanuc Tape readers | Fanuc Retrofits | Mitsubishi CNC Memory | Fanuc Transformers | Fanuc Robot parts | fanuc exchange | Fanuc chips | Fanuc Monitors | Fanuc Servo Drives | fanuc 6m spares | fanuc 6T spares | fanuc 5 spares | fanuc 7 spares | fanuc 0 spares | fanuc 3 spares | fanuc 9 spares | fanuc 2000/3000 spares | fanuc 10 spares | fanuc 11 spares | fanuc 15 spares |fanuc 16 & 18 spares |fanuc 21 & power mate spares | fanuc mate m |spares fanuc robot control spares | GE 1050 spares |Mitsubishi Cnc Spares| Allen Bradley Control Parts | Fanuc Power Supplys | Fanuc Memory Power Supplys |Great Resource Sits for CNC Machine Tool Parts.
Allen Bradley 7300, 7320, 7340, 7360.
Data Shuttle. Cool Program Shuttle.
Yaskawa Yasnak i80 Control Memory Upgrade!
Multi Dnc Software comes with Free Program Editor.